Duramax P0087 Code Error: Causes, Symptoms, And Fixes

The Duramax p0087 code indicates a fuel rail pressure issue. This code can be caused by several factors, including a clogged fuel filter, a faulty fuel pressure regulator, or a faulty fuel pump.

The Duramax p0087 code is one of the most common issues faced by Duramax diesel engine owners. It indicates that there is a problem with the vehicle’s fuel rail pressure. The fuel rail pressure can become too high or too low, causing the engine to run poorly or even stall.

The code is triggered when the fuel pressure exceeds a certain threshold. There are several potential causes of this issue, including a clogged fuel filter, a faulty fuel pressure regulator, or a faulty fuel pump.

If you’re experiencing the Duramax p0087 code, it’s important to have your vehicle properly diagnosed and repaired by a qualified mechanic.

5 Causes Of Duramax P0087 Code

A duramax p0087 code is a fault that indicates low fuel rail pressure. This code is generally found in chevy and gmc trucks with duramax diesel engines.

A p0087 code can cause rough idling, acceleration hesitation, and engine power loss.

Without proper diagnosis and repair, the issue can escalate, leading to even more severe engine problems.

Here are some possible causes to the p0087 code:

Clogged Fuel Filters

One of the most common reasons behind the p0087 code is a clogged fuel filter. The fuel filter becomes dirty and obstructed, which restricts the fuel flow and lowers the pressure.

The solution here is to replace the fuel filter.

Weak Fuel Pump

If the fuel pump is not providing enough fuel pressure, then it may result in decreased rail pressure. The pump’s malfunction can occur due to a faulty pressure regulator, damaged fuel lines, or a weak electrical connection.

The solution here is to replace the fuel pump if it is weak or malfunctioning.

Leaking Fuel Injector

Another reason behind the low fuel rail pressure can be a leaking fuel injector. Due to the worn-out injector seals, the fuel can leak out of the fuel system, causing a drop in pressure.

The solution here is to detect the leaking injector and replace the damaged seal.

Failing Fuel Pressure Sensor

The fuel pressure sensor is an essential component of the fuel delivery system. If the sensor is failing or malfunctioning, it sends the wrong information to the engine control module, causing a p0087 code.

The solution here is to test and replace the sensor if it’s faulty.

Faulty Fuel Pressure Regulator

If the fuel pressure regulator is faulty, it can lead to low fuel pressure. The solution here is to replace the regulator or check the vacuum lines to ensure the regulator is properly functioning.

It’s crucial to diagnose and resolve a p0087 code immediately to avoid further engine damage.

Checking the fuel pressure and pressure regulator, fuel filters, and the fuel pump can usually resolve the issue.

If you are unsure about the reason behind the p0087 code, it’s best to consult with a professional mechanic.

By getting timely and proper repairs, you can save yourself from costly consequences in the future.

Solutions For P0087 Duramax Code

Duramax p0087 code is a common occurrence in diesel owners, and understandably so. This code signifies an issue with the fuel rail pressure.

If you’re struggling with this issue, no need to worry! We’ve got you covered with the following solutions for p0087 duramax code.

Verify The Fuel Filter

To guarantee that your vehicle is safe from the p0087 code, it’s essential to validate the fuel filter.

You should refrain from driving with a dirty or blocked fuel filter, for this contributes significantly to fuel disturbance and consequent low fuel pressure.

Check for dirt or clog accumulation in the fuel filter.
Change the fuel filter if there is any chance of blockage or if it’s too dirty to clean.

Checkout The Injectors

When the fuel injectors begin to deteriorate, your vehicle may face issues such as low flow, low pressure, or even fuel leakage, all of which result in p0087 code. Here’s what you can do:

Checkout every fuel injector.
Use an electronic meter to check the injectors for proper flow rate.

Check The Fuel Pressure Sensor

Low fuel pressure sensor is one of the primary causes of duramax p0087 code. It could lead to low fuel pressure because of a malfunction in the sensor.

Therefore, you must verify and fix any malfunction in the fuel pressure sensor.

Verify the sensor’s electrical feed function.
Repair or replace the malfunctioning sensor.

Inspect Fuel Pressure Control Valve

Your vehicle’s fuel pressure control valve or fuel pressure regulator could result in the duramax p0087 code being displayed on your vehicle’s dashboard.

Remove the fuel pressure control valve.
Use a multimeter to inspect for short-circuits and faulty connection, if any.
Replace the device if needed.

Duramax p0087 code is a common issue that can be easily handled by replacing parts, sensors, regular checkups, filter change, and preventative measures.

So, don’t wait! Address the issue as soon as possible to ensure your vehicle’s smooth functioning.

Symptoms Of P0087 Duramax Code

The Duramax p0087 code is a relatively common problem that occurs in diesel engines, particularly in the Chevrolet Silverado and GMC sierra.

When a Duramax engine encounters a fuel-related performance issue, it triggers the p0087 code. The fuel system is responsible for delivering fuel to the engine for combustion.

If there is insufficient fuel pressure, the engine simply will not perform as it should.

Below are the common symptoms that indicate the occurrence of p0087 Duramax code:

Indicators Of P0087 Duramax Code

Hard starting: When an engine is experiencing low fuel pressure, it will have trouble starting. A Duramax engine with p0087 code will crank longer than usual and take longer to start, which is a sign of insufficient fuel pressure.
Engine misfire: An engine that experiences misfires is a common symptom of the p0087 code in Duramax engines. The fuel system is responsible for providing the engine with fuel, and if the fuel rail pressure is too low, the engine will misfire.
Power loss: Another symptom of the p0087 code in Duramax engines is a loss of engine power. The engine’s power is linked to the proper mix of fuel and air; if there is not enough fuel being delivered, the engine will stall, lose power, and not perform as it should.
Reduced fuel efficiency: Duramax engine with a p0087 code will usually experience lower fuel efficiency. This happens because there is inadequate fuel pressure to supply the engine with the right amount of fuel for proper combustion.
Check engine light illuminated: The engine control unit (ECU) will detect that the fuel pressure in the system is too low and will trigger the check engine light (CEL) to illuminate in the dashboard. The CEL is a warning system indicating that something isn’t functioning as it should.

So, these are the most common symptoms that you will experience when your Duramax engine encounters the p0087 code.

The root cause could be anything, ranging from a defective fuel pressure sensor to a failing fuel pump.

If you suspect that your engine is experiencing any of the symptoms mentioned above, it is recommended that you immediately take your vehicle to an experienced mechanic who can diagnose and repair the issue.

Diagnosing P0087 Duramax Code

P0087 code is a common issue that plagues some Duramax models and requires a diagnostic check-up to determine the cause.

Here are some key points to help you diagnose the p0087 Duramax code.

Check Fuel System For Leaks

Fuel leaks could be the root cause of the p0087 code.
Check fuel lines, fuel filters, and fuel pump for signs of leaks.
The leak could either be within the fuel system or in the fuel nozzle, so inspect carefully.

Test Fuel Pressure

Low fuel pressure could also trigger the p0087 code.
Have a fuel pressure gauge handy when performing the test.
Pressure readings should match the manufacturer’s specifications, which range from 25 psi to 45 psi.

Inspect The Fuel Pressure Regulator

The fuel pressure regulator could fail and cause the p0087 code.
Check for any signs of wear or cracks in the regulator.
Make sure the regulator is functioning correctly if it has any signs of wear.

Check For Air Leaks

Air leaks in the fuel system could also trigger a p0087 code.
Check all hoses and clamps in the system for any signs of wear or looseness.
Inspect the fuel lines and the fuel injector for any leaks or damage.

Utilize A Scan Tool To Monitor Fuel System Parts

A scan tool can help diagnose the p0087 code
Use the scan tool to monitor different fuel system components such as ICP, IPR, and FICM
Check for pressure levels in the fuel pump, fuel lines, and fuel injectors while monitoring the components.

Prevention Of P0087 Duramax Code

For all diesel engine owners, the Duramax p0087 code is a constant source of headaches. This code appears when there is an issue with the fuel rail pressure sensor in your engine.

Many people struggle with this problem in their GMC or Chevrolet trucks, but with proper knowledge about it, you can prevent it from happening.

To prevent facing this code in your Duramax engine, you can follow the steps outlined below.

Regular Maintenance And Inspection

Preventive maintenance is essential to keep your engine running healthy.

Schedule regular inspections of your fuel system, particularly the fuel rail pressure sensor and fuel injector lines, and ensure everything is in good working order.

Inspect fuel injectors: Check for leaking injectors as this can lead to fuel rail pressure issues.
Clean your fuel tank: Doing so will reduce the risk of clogging the fuel filter and causing issues with pressure on the fuel rail.
Maintain fuel filters: Ensure your fuel system has clean filters at all times to avoid clogging. A clogged fuel filter can affect fuel flow, causing the fuel pump to work harder than necessary and putting pressure on your engine’s fuel system.
Inspect fuel lines regularly: Pay attention to fuel and pressure lines as these can crack, get damaged or age, and cause issues with the fuel delivery system.

Use High-Quality Diesel Fuel

Using high-quality diesel fuel and fuel additives can help keep your engine clean, running efficiently, and extend the life of your fuel system.

Use diesel fuel that meets the engine manufacturer’s specifications and avoid low-quality fuel that could damage the engine.

Check Your Fuel Cap Regularly

A loose fuel cap or damaged seal can lead to engine problems, such as a vacuum in the fuel system.

Make sure you tighten the fuel cap after every refuel.

Drive Responsibly

Your driving habits can play a role in the health and efficiency of your engine. Avoid overly aggressive driving, jack-rabbit starts, and rapid acceleration as this can cause fluctuation in fuel pressure that can lead to fuel pressure issues.

Stay Up-To-Date On Recalls

Make sure that you are aware of any recalls that may apply to your Duramax diesel engine.

Check regularly with your GMC or Chevrolet dealership to be aware of any potential issues that require action on your part.

Preventing the Duramax p0087 code from happening requires constant maintenance of your engine’s fuel system.

By following these steps, you can reduce the risks of fuel pressure issues and, ultimately, lengthen the life of your engine.

Frequently Asked Questions Of Duramax P0087 Code

What Is A P0087 Code In A Duramax Engine?

The p0087 code is a common diagnostic trouble code found in Duramax engines.

It relates to a fuel system pressure problem, usually caused by a malfunctioning fuel pressure regulator or low fuel pressure from the fuel tank.

What Are The Symptoms Of A P0087 Code?

The symptoms of a p0087 code may include poor engine performance, rough idling or stalling, difficulty starting the engine, and hesitation or loss of power when accelerating.

These symptoms may be intermittent and can occur in any weather conditions.

How Is A P0087 Code Diagnosed?

A p0087 code can be diagnosed using an OBD-ii scanner, which will read the code and provide additional diagnostic information.

Further tests may include checking the fuel pressure sensor, the fuel injectors, and the fuel pump to determine the root cause of the code.

How Is A P0087 Code Fixed In A Duramax Engine?

Fixing a p0087 code in a Duramax engine often requires replacing or repairing a malfunctioning fuel pressure regulator or fuel pump.

Other potential solutions may include cleaning or replacing the fuel injectors, repairing damaged fuel lines, or repairing vacuum leaks in the engine.

How Can I Prevent A P0087 Code From Occurring?

Regular maintenance and preventative measures can help prevent the occurrence of a p0087 code in a Duramax engine.

These measures may include checking and replacing fuel filters regularly, keeping the fuel tank filled with quality diesel fuel, and avoiding running the engine on low fuel levels.

You may alos read…
https://autosmechanic.net/l5p-duramax-cold-air-intake-worth-it/ https://autosmechanic.net/how-long-will-6-6-duramax-last/ https://autosmechanic.net/chevy-truck-ignition-switch-problems/ https://autosmechanic.net/gmc-acadia-years-to-avoid/